If your chainsaw is not starting? here's what to check

[Miller29]

If your chainsaw not starting, first check the spark plug for carbon buildup or wear, a clogged carburetor from old fuel or a bad filter could also be the culprit, you can look out for a broken recoil spring or malfunctioning recoil starter, both of which can keep you from starting. Regular maintenance and replacements like a new spark plug can save you a lot of trouble

 

[CutTheNoise]

Spot on! And to add, I also give the fuel the sniff test. If it smells off, it's likely gone bad!
Keeping up with the maintenance like fresh fuel makes a huge difference in avoiding no-start situations!

 

[Leon Couper]

Both filters tank and air also on/off switch can be a cause at times.

 

[Cuttingranger]

If your chainsaw not starting, first check the spark plug for carbon buildup or wear, a clogged carburetor from old fuel or a bad filter could also be the culprit, you can look out for a broken recoil spring or malfunctioning recoil starter, both of which can keep you from starting. Regular maintenance and replacements like a new spark plug can save you a lot of trouble

Great job on checking the spark plug and carburetor! If it's still not starting up, a dirty carb or a worn-out spark plug might be the culprit. Also, don't forget to look at the recoil starter for any problems, that could prevent the engine from turning over. Regular maintenance, such as swapping out the spark plug and giving the carb a good clean, really makes a difference

 

[Miller29]

Spot on! And to add, I also give the fuel the sniff test. If it smells off, it's likely gone bad!
Keeping up with the maintenance like fresh fuel makes a huge difference in avoiding no-start situations!

Great tip on the fuel sniff test, the fresh fuel makes a big difference...so keeping everything clean and maintained really saves a ton of headaches down the road

 

[Miller29]

Both filters tank and air also on/off switch can be a cause at times.

Yeah you are probably right

 

[Miller29]

Great job on checking the spark plug and carburetor! If it's still not starting up, a dirty carb or a worn-out spark plug might be the culprit. Also, don't forget to look at the recoil starter for any problems, that could prevent the engine from turning over. Regular maintenance, such as swapping out the spark plug and giving the carb a good clean, really makes a difference

Thanks for sharing

 

[HArborist2]

If your chainsaw not starting, first check the spark plug for carbon buildup or wear, a clogged carburetor from old fuel or a bad filter could also be the culprit, you can look out for a broken recoil spring or malfunctioning recoil starter, both of which can keep you from starting. Regular maintenance and replacements like a new spark plug can save you a lot of trouble

Absolutely right, spark, fuel, air, and recoil are the usual culprits. I've avoided a lot of hassle by simply changing a spark plug and cleaning the carburetor. A quick check before using it can really make a huge difference.

 

[Stihl 99]

Good info folks

 

[anoldnewb]

Absolutely right, spark, fuel, air, and recoil are the usual culprits. I've avoided a lot of hassle by simply changing a spark plug and cleaning the carburetor. A quick check before using it can really make a huge difference.

how do you clean the carburetor?